http://www.circuitdiy.com/en-US http://images.buyitsellit.com/7050_logo.png http://www.circuitdiy.com/ http://www.circuitdiy.com/product/microstepping-stepper-motor-controller-sanyo-stk672-080-pcb-board $7.00
STK672-080 Stepping Motor (Sine Wave Drive, Output Current 2.8A) Driver IC from SANYO (Assembled in Korea). This driver hybrid IC uses power MOSFETs in the output stage and include a built-in microstepping controller based on a unipolar constant-current PWM System. Its provide simple interface and minimum external components supports up to five excitation methods, 2-phase, 1-2 phase, W1-2 phase, 2W1-2 phase, and 4W1-2 phase and can provide control of the basic stepping angle of stepping motor u....]]> Sat, 16 Jul 2011 20:45:52 GMT http://www.circuitdiy.com/product/stk672080-sanyo-microstepping-stepper-motor-controller $6.50
STK672-080 Stepping Motor (Sine Wave Drive, Output Current 2.8A) Driver IC from SANYO (Assembled in Korea). This driver hybrid IC uses power MOSFETs in the output stage and include a built-in microstepping controller based on a unipolar constant-current PWM System. Its provide simple interface and minimum external components supports up to five excitation methods, 2-phase, 1-2 phase, W1-2 phase, 2W1-2 phase, and 4W1-2 phase and can provide control of the basic stepping angle of stepping motor u....]]> Thu, 14 Jul 2011 18:58:08 GMT http://www.circuitdiy.com/product/vibrator-motor-bristle-bot-vibrobot-beam-motors $0.80
Miniature DC Vibrator, Pager Motor from Japan supposedly to be used for pagers. The marking on the motor may be different from the picture shown. But the mechanical and electrical specifications are the same. These motor are mounted with Half CAM on the shaft and operates from 1.3V up to 3.0V. Recommended to run on 1.5V watch battery. There is positive and negative wiring connected to the leads of the motor which allows easy solder or connecting to battery. Physical Specifications Ope....]]> Sat, 09 Jul 2011 23:25:30 GMT http://www.circuitdiy.com/product/to-3-metal-can-test-burn-in-socket $16.00
Description: TO-3 Test and burn-in sockets from Loranger International Corporation. Part number on the socket shows LIC-3127-03. The pins are gold coated which minimize resistance and corrosion over time. Physical: Pitch: 0.43" (in) Contacts: 3 pins Socket (Length): 1.54" (in) Socket (Width) : 0.72" (in) Socket (Height): 0.895" (in) Documents: Loranger's Website ....]]> Thu, 21 Aug 2008 02:13:24 GMT http://www.circuitdiy.com/product/3m-textool-power-in-line-to-3p-to-66-pn-203-2737-55-1102 $16.00
Description: 3M Textool Power In Line TO-3P TO-66 Test and Burn-in Sockets. This socket accepts wide variety of in-line devices up to 3 leads including TO-3 and TO-66. Its designed so as the body and contacts are replaceable. Slotted out 2 entry ports accept devices with 0.075" (1.90mm) to 0.200" (5.1mm) between leads. This device must be mounted to board with screws. 3M Part Number: 203-2737-55-1102. Physical: Insulation Material: Glass Filled Polyphenylene-Sulfide ....]]> Thu, 21 Aug 2008 01:15:17 GMT